Ceiling light with pull chain hanging from the apparatus at a height low enough that you can reach and grab. These chains traction control lighting portion of the fan. Pull the string or strings replacement fan is one of the most common roof repairs and that can be done by the average do-it-yourselfer.
The switch ceiling light with pull chain on the ceiling fan on and off the function lamp lighting. If your ceiling fan has two or three stages starting the pull chain switch will also allow you to change the level of illumination. A tug will turn on the light in the dimmest level. Two tugs will change the light to the middle level, and three tugs change the light at the brightest level. If I pulled for the fourth time, the switch returns light to the off position. Many ceiling fans are controlled by wall switches as well. These wall switches control the flow of current to the fan, and break traction chain terminators.
If you have a broken chain switch, it can be changed without much effort. You will need to locate the switch box on the outside of the fan and remove any cover plate. With the switch exposed, try to reconnect the chain or rope as it was. If the anchor or the switch is broken beyond repair, you will need to remove the switch itself and visit the center of home improvement or local output ceiling light with pull chain. Show the professionals in the shop and ask her broken switch that tells a new one. Reinstall the switch, so be sure to place the wiring as it was. If you are going to try to reconnect or change the ceiling fan pull chain light switch, make sure the fan power has been completely turned off before starting the process.